PS3 3 Beeps of Death Fix: How To Fix PS3 3 Beeps

Did your PS3 beep three times when you tried to turn it on? Are you looking for the right solution for PS3 3 death beeps that will not only help you fix the problem but also allow you to avoid a recurrence? Booting up your console only to hear the dreaded 3 beeps can be very infuriating, sad, and frustrating. Here are some things you can do to fix PS3’s 3 death beeps.

1. Use the reflow process

What this basically means is that you are trying to put the broken pieces or contacts back together. You can do this by using a hair dryer aimed at the processor board. Run this on the board for 15-25 minutes. This will help the solder heat up enough to create a form of contact with all the wires and cables.

2. Air dry the board

Then take it to a fan or air conditioner and allow it to hit the processor for another 15-225 minutes. This is to allow the slightly melted solder to solidify and hopefully reestablish contact with the wires again. After this, dock the console and start it up to see if it turns on. If it’s still beeping, then it’s time to use the following PS3 solution 3 death beeps.

3. Get an instructional guide

There are guides that will help facilitate the process and will explain the process in detail. By following the step-by-step videos in these guides, you will be able to fix the bugs, recover your saved games – you will lose them if you send them to Sony and repair shops – and get the console working within 1-2 hours.

Leave a Reply

Your email address will not be published. Required fields are marked *